logo

SPECIALISTS IN INDUSTRIAL SURFACE COATINGS

bsi-assurance-mark-iso-9001-keyb-(1)150x70fc34

 


DORKEN DELTA MKS

 

Based in Herdecke Germany, Dorken have for over 30 years pioneered the development of thin film zinc lamella coatings which provide exceptional galvanic corrosion protection in thin film coatings.

 

The functional performance of their coatings can be further enhanced by the application of ‘Delta Seal’  topcoats which help to seal the zinc. The topcoats can additionally provide lubrication which in turn provides a consistent coefficient of friction ensuring consistent clamp loads are achieved when used on threaded fasteners.

 

Geomet Coating Alternative

 

Dorken DELTA-MKS® is one of our high-quality products and application solutions that we offer as a Geomet alternative to all of our clients. Made for use in high-performance environments our selection is a great alternative, anti-corrosion and zinc flake-based coating on the market.

 

Dorken DELTA-MKS®  coatings are widely specified in the automotive industry,  wind power and are approved (in Germany) for use with potable water.

 

INDUSTRY SPECIFICATIONS aligned to DELTA-MKS® products can be found below for automotive (Ford, General Motors Holden, Toyota) & windpower (Acciona).

 

Enquiry within to find out about our products alternatives for Geomet. Contact us today.

 

GENERAL MOTORS HOLDEN…

GME 00255 Typ F

 

Range of application:      Screws, nuts, clips, clamps and other iron materials for external

                                             components and components subject to high loads.

 

Coating thickness:          Basecoat: min. 8 µm

                                             Topcoat: min. 4 µm, 3µm

 

Coefficient of friction:     µtot = 0.13+-0.02

 

Corrosion Resistance:   288h: max. 5% Zn-corrosion permitted

 

Coating composition:     DELTA®-TONE 9000 + DELTA®-SEAL GZ

                                             DELTA-PROTEKT® KL 100 + DELTA®-SEAL GZ

 

 

GMW 3359

 

Range of application:     Connection elements (screws and bolts >M6) exposed installation

                                             position.

 

Coating thickness:         Max: according to tolerances or max. 25 µm under the head of the

                                            screw.

 

Coefficient of friction:    µtot = 0.10 – 0.16

 

Corrosion resistance:   144h: max 5% Zn-corrosion (DIN 50021-SS)

                                            480h: no Fe-corrosion (DIN 50021-SS)

 

Coating system:             Basecoat   DELTA-PROTEKT® KL 100

                                            Topcoat      DELTA®-SEAL GZ silver or black

FORD…

FORD WSD-M21P10 surface B2 (S303)

 

Range of application:      Heat-cured corrosion protection coatings on steel

 

Coating thickness:          Min 5 µm / min 15 g/m²

 

Corrosion resistance:    120h: no Fe-corrosion

 

Coating system:               DELTA® – SEAL black

 

 

FORD WSD-M21P11 surface B2 (S307)

 

Coating thickness:         Basecoat  Min 8 µm / 25 g/m²

                                            Topcoat     Min. 4 µm / 22g/m²

 

Corrosion resistance:   440h: no Fe-corrosion

 

Coating system:              Basecoat  DELTA® -TONE 9000

                                            Topcoat     DELTA® -SEAL

 

 

FORD WSS-M21P42 surface A3 (S442)

 

Coating thickness:         Basecoat  Min 8 µm

                                            Topcoat     Min 2 µm

 

Coefficient of friction:    µtot = 0.14+-0.03 (accord. WZ 101)

 

Corrosion resistance:   240h: no Zn-corrosion,  840h: no Fe-corrosion

 

Coating system:              Basecoat  DELTA PROTEKT® KL 100

                                            Topcoat     DELTA PROTEKT® VH 302 GZ

 

 

TOYOTA…

TSH7702G

 

Coating System A:    Basecoat: DELTA-PROTEKT® KL 100

 

                                      Topcoat: DELTA-PROTEKT® VH 300

 

Coating System AS:  Basecoat: DELTA-PROTEKT® KL 100

 

                                       Topcoat: DELTA-PROTEKT® VH 300/301 GZ

ACCIONA WINDPOWER…

CS0129

 

Coating System:         Basecoat   DELTA®-TONE 9000

 

                                       Topcoat       DELTA®-SEAL

 

Layer thickness:         4-8µm + 8-16µm

 

 

CS0129

 

Coating System:        Basecoat   DELTA®-TONE 9000

                                      Topcoat      DELTA®-SEAL

 

Layer thickness:         4-8µm + 8-16µm

 

 

ADHESIVE COATING SERVICES © 2018

 

 

acs_accordian